Sale ends soon!
7 Liter Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover This 7L Oil Changer is used in extracting or changing engine oil or lubricants in motor vehicles, motor, bikes, marine engines, stationary engines. The kit includes Î¦6.7mm and Î¦6mm suction probes to drain engine oil through the dipstick hole and a 9.8mm main extraction to drain such items as fish-tanks, basins, baths, cisterns, sinks etc. Oil extraction 1. Ensure the vehicle is on level ground and run the engine for approximately 5 minutes to warm the oil and allow any contaminants within the oil to thoroughly mix and turn the engine off. 2. Remove the vehicle’s oil dipstick. 3. Connect the main suction tube to both the pump inlet and probe. 4. Raise the handle to its highest limit and pump it fully several time to create a vacuum which will automatically begin to extract the oil/fluid. 5. Once completed, remove the main suction tube from the pump, pour the oil/fluid into a suitable container and dispose of it in accordance with local authority regulations. 6. In the event of fluid entering the inner pump chamber it can be expelled from the unit as follows. Specification Color: White Capacity: 7 liters Nylon hoses: 7.8 x 9.8mm; 5.3 x 6.7mm; 4 x 6mm(0.3X0.4inch; 0.2X0.26inch; 0.16X0.24inch) Fluid temperature range: 35Â°F- 200Â°F/1Â°- 95Â°C Muti-size hose: change different sizes for different condition Portable fluid extractor empties in 16 pumps or less Larger capacity than competitive models in the same field By manpower to push and have vacuum pressure Storage more, improve work efficiency Package Content 1 X 7 L Oil Extractor 1 X Î¦9.8mm Nylon Hose 1 X Î¦6.7mm Nylon Hose 1 X Î¦6mm Nylon Hose